9 Top Tips for Keeping Your Car Tyres in Good Condition
Anyone can benefit from helpful tyre and wheel maintenance and tips, whether it's winter or summer. Tyres are more than just rubber seals around your wheels; they are sophisticated inventions designed to transport your vehicle over long distances.
When it comes to car service in car repair garages, consult our 9 top tips whenever you need to buy new tyres, switch from one type to another, such as winter to summer tyres, or simply want to know how to maintain your tyres better:
Think about substituting your tyres for expanded security and economy
If you live in a space where the streets are influenced via occasional changes, or on the off chance that you are making a trip to an environment that is altogether different from your own, you might need to replace your tyres. Summer tyres have poorer braking properties than winter tyres when the road surface becomes colder, which can be dangerous. Aside from security concerns, there is also the matter of money. Summer tyres use less fuel when driving on cold roads than winter tyres!
Cleaning your wheels and tyres
If you can change your own tyres, it is significant that you are thoroughly clean or wash the bolts, nuts, and wheel hubs. This will reduce the risk of serious defects, rust, and steering impact.
Check your tyres' tread depth
Always ensure that the tread depth meets the legal requirement of at least 1.6 mm. Inserting a 20p coin into the tyre's tread is a common test. You're fine if it obscures the outer rim because it's less than 1.6 mm. Legal requirements are one thing, and security is something entirely different. To achieve the best road grip, avoid driving on tyres with tread depths of less than 3 mm, depending on tyre width and other factors. This makes sure your tyres are as secure as possible.
Examine for wear and tear
If your tyres have uneven wear, it is recommended that you replace them; alternatively, make sure that the tyres with the least wear are mounted at the back. If you notice uneven wear, the vehicle will most likely need a wheels tracking/wheels alignment before the tyres are replaced.
Check that the bolts are tightened
Whether you change your own tyres or hire a professional, you must always check that the bolts are tightened after a few miles of driving.
Check the tyre pressure on a regular occasion
If the car garage did not do it for you, make sure to check the tyre pressure after they have been replaced to ensure that the pressure is sufficient.
Maintain tracking and wheel alignment
Whether you change your own tyres or have them done professionally, you should have your wheels aligned at least every second or third year. This ensures that the wheels' geometry and angle on the road are correct.
Changing your tyres
Changing your tyres may be a good idea to avoid wearing them out too quickly. Essentially, this can be done when the car is serviced. Consult your car mechanic to determine whether your tyres are suitable for swapping.
Store spare tyres properly
If you need to replace your tyres, make sure the current set is properly stored when you dismount them. It is critical to store the set you are not driving on properly. If the tyres are mounted on rims and inflated, they must be hung or stacked. Preferably in tyre bags but can also be carried on a rack.
Identifying Tyre Sizes, Markings, and Profiles
Sidewall markings on every tyre provide information about the tyre manufacturer, tyre range, size, load index, speed rating, and age; however, do you understand what this means?
The most important marking on your tyre is the size, and you must ensure that you order the correct size when replacing your tyres. Consider the following example: 255 55 R17 96W:
· In millimetres, the width of your tyre is 255. (255mm)
· 55 denotes the profile or height of the tyre as a percentage of the overall tyre width.
· It is a radial tyre, as indicated by the letter R.
· The rim of the wheel measures 17 inches (17”).
· The load index stands at 96. (total tyre load capacity)
· The letter W stands for the speed rating (maximum approved tyre speed)